The Skreddy Pedals™ Hybrid Overdrive cleans up extremely well with the guitar volume and has an authentic rock voice like a huge early 70's British tube amplifier.
This circuit has less gain and more headroom compared to the Skreddy Major Overdrive. Sounds nearly identical to the Hybrid Fuzz Driver (same oldschool-silicon-germanium fuzz stage) but has a stronger tone control for less high-end fizz and better ability to darken at min, an ever-so-slightly stronger low-midrange, and it stays punchy and cutting even at max gain, never gets mushy.
Has a singing, vintage voice with plenty of gain just shy of fuzz and gets along with all kinds of pickups. The tone is focused but balanced. The attack is amp-like and cutting with dynamic overdrive that responds intuitively to guitar volume, pickup selection, and picking technique.
Very reactive to the touch; notes are sweet, chords have excellent string separation, and there is plenty of crunch and growl while holding together and not going fuzzy and compressed.
We’ll invoice you for the balance including the shipping cost upon completion.
Allow about a month for us to get through our list and make your pedal.
If I don’t answer an email, please re-send it in case I missed it. We are busier now than ever.
US orders will be sent via USPS Priority Mail. International orders will be sent using USPS Priority International where available.
We will not declare your package at a lower value for customs; be prepared to pay your own country’s import duty when you receive the package.
Goes from chimey to raucous with your guitar volume and responds to your picking intensity with nuance and authority. Plenty of twang and sparkle that doesn't get lost behind the dirt!
You will be inspired to play longer and write new tunes, your guitar will sound so good! Lots of sounds available--just play with the knobs and your guitar's controls too.
Regular 9v negative ground, no special power requirements. 9v battery is not included. If you use a battery, then remember to un-plug the input cable from the pedal’s input jack when not in use to prevent draining (or you can also just plug in a power-supply, which disconnects the battery).
You may supply external power through an AC adapter. All Skreddy Pedals accept the industry-standard 9v DC plug (5.5mm barrel x 2.1mm center coax), negative tip. Please use a quality, regulated, filtered power supply.